Ulstein Model L295 Propulsion Unit
|
(3) Ulstein Model L295 Propulsion Units
|
| Three available: Two Refurbished (no engine covers), One New |
| Approx 230 hp each |
Model Number: L295 7500S
Manufacturer: Ulstein Maritime, Ltd.
Weight: Approx. 16,500 lbs.
Engine: DETROIT, 6V-92
Clutch: CAPITAL GEARS, Model HY400, ratio 1.00:1
Overall reduction ratio is 3.847:1 in two stages:
1st reduction of 1.282:1> belt drive
2nd reduction of 3:1> lower leg prop. shaft housing
|
Propellers: 42”x39.55”, 3-blade, Manganese Bronze. The propeller is housed inside a nozzle similar to a Kortz Nozzle.
Thrust: Originally designated as “7,500 lb. Thrust”
Horsepower: 230 HP @ 1800 RPM, 270 HP @ 2100 RPM
Steering: Hydraulic. Powered by hydraulic pump mounted on the 6V-92 diesel engine. The steering controls on the used units can be mounted adjacent to the unit or in a remote location, such as the raised pilothouse that is available. Steering controls for the un-used unit are mounted on the unit itself.
Fuel: 122 gal / built-in fuel tank mounted fwd of the engine.
Hydraulic Oil: 25 gal / built-in (Same tank as the fuel but a separate compartment that is created by a bulkhead inside the tank.
Built: 1984. Two Rebuilt in 2000. Manufactured for U.S. Navy
Skid mounted, diesel powered, 360º steerable propulsion unit with tiltable outboard type foot. Power transmission is through a hydraulic clutch and then a belt drive to the stern drive and propeller. Currently set up for raw water heat exchange cooling system.
Condition: Excellent
|
Download Spec. Sheet (MS Word Document)
Download Layout Drawing (.gif File)
|
|
| |
| |
|
